ansys 在體的某一表面同時加載 對流荷載和熱流密度的問題 高手求救!
/PREP7
ET,1,SOLID70! 熱分析單元選擇 type=1
ET,2,SURF152 !表面效應單元type=2
KEYOPT,2,4,1! Exclude：keyopt(4)=1 指定表面效應單元的K4=1,去掉邊中點,成為四結點表面單元
KEYOPT,2,8,2
是這么做的,先對體進行了網格劃分,然后在那一表面加上 表面熱效應單元了
asel,s,10
AATT, 1, , 2, 0,!指定實體上表面用152號單元 mat=1 typ=2
MSHAPE,0,2D
MSHKEY,1
esize,
amesh,all
之后,選擇那個面上所有的表面熱效應單元,施加對流載荷
asel,s,10
nsla,s,1
ESLN
ESEL,R,TYPE,2
SFE,ALL,CONV,10
然后在該面施加 熱流密度,
IC,ALL,TEMP,25,! 所有節點初始溫度設定
asel,s,10
nsla,s,1
ESLN
ESEL,R,TYPE,1
SFE,ALL,HFLUX,6000 !施加6000的熱流密度
TIME_STEP=100
ANTYPE,4  ! 設定瞬態計算
TRNOPT,FULL
LUMPM,0
OUTRES,ALL,LAST, ! 僅輸出最后子步結果
TIME,TIME_STEP! 計算終了時間
AUTOTS,1! 自動步長
NSUBST,1,2,1
TIMINT,1
TINTP,0.005, , ,-1,0.5,-1 ! 積分參數
KBC,1! 載荷階梯插值
TSRES,ERASE
allsel
SOLVE  ! 求解
FINISH
出現了些問題,
*** ERROR *** CP =24.359 TIME= 16:39:48
Bulk temperature is undefined for convection surface element 57121.
Use SFELIST or SFLIST command to find other elements without bulk
temperatures.
*** ERROR *** CP =24.422 TIME= 16:39:51
The step data was checked and there were errors found.
Please check output or errors file ( F:\work\我的程序\666.err ) for
messages.
表面效應單元加載的是 對流載荷
表面其他單元加載的 是 熱流密度