If multiple network interfaces are attached to a single network, each interface must have a unique IP address.Prior to AIX 5.1, if you configured multiple network interfaces on the same network, only the first interface you configured would have a route to the network in the IP routing table. This means that all outgoing IP traffic would go through that interface only, not any of the other interfaces on that network. Although it is possible to use this configuration to load-balance incoming traffic, it is not a recommended configuration prior to AIX 5.1.In AIX 5.1 and above, the Multipath Routing feature allows routes to be added to the IP routing table for multipath interfaces on the same subnet. This allows outgoing traffic to alternate between the interfaces rather than being sent through one interface only.
如果有多個網絡接口連接到一個單一的網絡,每個接口都必須有一個唯一的IP地址.AIX 5.1之前,如果你配置多個網絡接口,在同一網絡,只有第一個接口配置將有一個路由在IP路由表的網絡.這意味著所有的IP流量將通過該接口,而不是任何其他接口,網絡.雖然可以使用此配置負載平衡的傳入流量,它不是一個推薦的配置AIX 5.1.in AIX 5.1以上之前,多路徑路由功能允許路由添加到路由表在同一子網多徑接口.這允許外出交通交替之間的接口,而不是通過一個界面只發送.

翻譯如上,如果想對照查看,進入“百度翻譯器”即可,希望我的回答可以幫到你.