根據流水作業卡要求從原材料庫領取適用的鍍錫鐵帽、瓷基體,將原材料的檢字號填在流水卡相應位置,并將瓷基體經瓷棒篩選機進行篩選,除去碎屑和雜物.調整自動壓帽機,左右振動盤內一次不易放太多帽蓋,一般以覆蓋振動盤底為適,分別調整鐵帽供料和瓷基體供料速率及適當位置.

Get the suitabletinnedironcapsandceramicbases fromrawmaterialsstorage/warehouseas required by the flow processcard, fill the rawmaterials inspection number in correspondingspace/placeon the card, and screen the porcelain sticks with a screening machine to remove debris and foreignmatters. Adjustthe automatic cap pressing machine, [do not put too much caps in the left and right vibration disk, it is usually appropriate to cover the vibration disk bottom],and adjust the feeding speed for the caps and ceramic basesrespectively as well as adjust to the proper positions.

.

詳見附件.